This premium brass stock sheet offers exceptional wear resistance and a naturally low coefficient of friction, making it ideal for demanding lubricating applications. Precisely manufactured for consistent performance in critical industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.864" |
| Length | 39" |
| Width | 44" |
Trusted by engineers across multiple sectors, this 0.864" thick brass stock sheet, measuring 39" in length and 44" in width, is engineered for superior performance in lubrication systems. Its inherent machinability and excellent bearing properties, combined with good corrosion resistance typical of brass alloys, ensure reliable operation under various load and environmental conditions. This material is a proven choice for components requiring reduced friction and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the brass sheet to the substrate, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools which can lead to imprecise edges and burrs. | Employ sharp, high-quality cutting tools specifically designed for brass to achieve clean, accurate cuts. |
| Inadequate surface preparation leading to poor adhesion or premature wear. | Thoroughly clean both the brass sheet and the mating surface to remove any oils, dirt, or contaminants before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Bushings and sleeves, Lubricated sliding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||