This premium, self-lubricating Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction. Its robust mechanical properties make it ideal for demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.862" |
| Length | 35" |
| Width | 39" |
Precision-manufactured to tight tolerances, this 0.862-inch thick Nylon stock sheet measures 35 inches in length and 39 inches in width. Fabricated from high-grade lubricating Nylon, it exhibits excellent tensile strength, impact resistance, and a significantly reduced friction coefficient. This material is engineered for environments requiring reduced wear, self-lubrication, and resistance to common industrial chemicals, ensuring prolonged component life and operational efficiency in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of contaminants. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut piece to the intended surface using industry-standard mechanical fasteners or adhesives suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic, leading to chipping or melting. | Employ high-speed steel or carbide-tipped saw blades specifically designed for cutting Nylon to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the Nylon. | Utilize washers to distribute pressure and avoid overtightening; allow for slight thermal expansion of the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Bushings and bearings in low-load environments, Chute liners and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||