This industrial-grade Nylon stock sheet, measuring 0.860" thick by 30" wide and 37" long, offers exceptional strength, wear resistance, and machinability for demanding applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.860" |
| Length | 30" |
| Width | 37" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits superior mechanical properties. With a substantial thickness of 0.860 inches, a length of 30 inches, and a width of 37 inches, it provides ample material for intricate machining and fabrication. Nylon's inherent characteristics, including excellent tensile strength, impact resistance, and low coefficient of friction, make it suitable for producing durable components subject to significant stress and wear, such as gears, bearings, bushings, and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize a high-quality saw blade appropriate for plastics, ensuring proper feed rate and cooling to prevent melting. 3. Carefully deburr all cut edges to remove sharp points and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect saw blade for cutting nylon. | Employ a sharp, carbide-tipped saw blade specifically designed for cutting plastics to achieve clean, precise cuts and avoid material damage. |
| Applying excessive heat during machining, leading to melting or deformation. | Maintain appropriate cutting speeds and utilize coolant or air blast to dissipate heat effectively, preventing material degradation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear-Resistant Components, Gears and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||