This robust 0.860" thick nylon stock sheet offers exceptional strength and durability. Its precise dimensions and superior material properties make it ideal for demanding industrial environments requiring reliable performance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.860" |
| Length | 17" |
| Width | 20" |
Built to exacting engineering tolerances, this 0.860" thick nylon stock sheet measures 17" in length and 20" in width. Engineered from high-performance nylon, it exhibits excellent tensile strength, abrasion resistance, and impact absorption. This material is ideal for fabricating custom machine guards, wear pads, structural components, and high-stress fixtures where longevity and reliability are paramount. Its consistent density and controlled molecular structure ensure predictable performance under significant mechanical loads and environmental stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Precisely measure and mark the intended placement for the nylon sheet. 3. Secure the nylon sheet using appropriate fasteners, ensuring even distribution of load to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without appropriate washers. | Utilize large-diameter washers to distribute the clamping force over a wider area of the nylon sheet, preventing potential cracking or deformation. |
| Over-tightening fasteners, leading to material compression or damage. | Tighten fasteners to a torque specification appropriate for nylon, typically lower than for metal, to avoid over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machine Guarding, Wear Strips and Bushings, Structural Components, Custom Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||