This high-quality carbon steel stock sheet is specifically manufactured to a 0.860" thickness for applications requiring superior lubricating properties. Its robust dimensions (42" L x 20" W) and carbon steel composition ensure excellent durability and performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.860" |
| Length | 42" |
| Width | 20" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.860 inches, a length of 42 inches, and a width of 20 inches. The material's inherent properties, including its tensile strength and wear resistance, make it ideal for high-friction environments and dynamic load-bearing components. Its surface finish is optimized for lubricant retention, minimizing wear and extending the operational life of mating parts. This sheet is engineered for applications such as bearing components, sliding mechanisms, and wear plates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly cleaned and free of any debris or contaminants. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning leading to surface contamination. | Thoroughly degrease and clean the sheet surface before installation to ensure optimal lubricant adhesion and prevent premature wear. |
| Uneven fastening causing stress concentrations. | Utilize a systematic fastening pattern with calibrated torque settings to ensure uniform load distribution and prevent distortion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing Races and Cages, Sliding Wear Plates, Gears and Sprockets (for low-speed, high-load applications with lubrication).
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||