This robust carbon steel stock sheet is specifically designed for the rigorous demands of pneumatic systems. Its substantial thickness and high-strength material ensure exceptional durability and resilience in high-pressure environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.859" |
| Length | 17" |
| Width | 46" |
Engineered for reliability and performance, this 0.859" thick carbon steel stock sheet offers superior structural integrity crucial for pneumatic applications. The material's inherent strength and durability make it ideal for fabricating robust housings, mounting brackets, and structural components within pneumatic machinery. Its precise dimensions of 17" x 46" allow for efficient material utilization in custom fabrication, ensuring consistent performance and longevity under operational stress. This sheet is optimized to withstand the dynamic loads and potential impacts inherent in pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before fabrication. 2. Accurately cut the sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten fabricated components to the pneumatic system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or thinner gauge steel for structural components. | Always utilize the specified 0.859" thick carbon steel sheet to ensure adequate load-bearing capacity and prevent premature failure in pneumatic systems. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease all surfaces to be joined to ensure strong, reliable welds and prevent contamination. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder fabrication, Compressor housing construction, High-pressure manifold systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||