This high-quality brass stock sheet, precisely machined, is engineered for optimal performance in lubricating applications. Its robust material properties ensure excellent wear resistance and low friction characteristics.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.855" |
| Length | 20" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.855" thick brass stock sheet offers a nominal length of 20" and a width of 15". Composed of a specific brass alloy optimized for lubrication, it exhibits excellent machinability and inherent self-lubricating qualities. This composition minimizes wear on mating surfaces and reduces the need for external lubricants in demanding environments, making it ideal for bearing components, bushings, and sliding mechanisms where friction reduction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Carefully position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate hardware, maintaining consistent pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a generic brass alloy not designed for lubrication. | Specify and use a brass alloy specifically formulated for its self-lubricating properties to ensure optimal performance and longevity. |
| Improper surface preparation before installation. | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure even contact. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and strips, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||