This brass stock sheet is a high-performance material specifically formulated for lubricating applications. Its inherent properties ensure excellent wear resistance and low coefficient of friction, making it ideal for demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.853" |
| Length | 41" |
| Width | 36" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.853 inches, a substantial length of 41 inches, and a width of 36 inches. Composed of a specialized brass alloy optimized for lubricity, it exhibits superior self-lubricating characteristics, reducing wear and heat generation in moving parts. Its good machinability and corrosion resistance further enhance its suitability for diverse industrial applications where smooth operation and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the designated component, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Utilize this specifically formulated lubricating grade brass stock sheet for optimal performance and wear reduction. |
| Inadequate surface preparation of mating parts. | Thoroughly clean and degrease all mating surfaces before installation to ensure maximum contact and lubrication effectiveness. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Sleeve bearings, Wear plates, Gears and bushings, Slide components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||