Engineered for demanding pneumatic systems, this 0.850-inch thick brass stock sheet offers exceptional machinability and corrosion resistance. Its robust dimensions (45" x 30") make it ideal for fabricating custom pneumatic components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.850" |
| Length | 45" |
| Width | 30" |
Trusted by engineers across multiple sectors, this brass stock sheet is manufactured to precise tolerances, ensuring reliable performance in critical pneumatic applications. With a substantial thickness of 0.850 inches and generous dimensions of 45 inches by 30 inches, it provides ample material for complex component fabrication. The inherent properties of brass, including its excellent corrosion resistance and high machinability, make it a preferred choice for valve bodies, fittings, manifold blocks, and other specialized pneumatic parts requiring durability and precise sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against project specifications. 2. Fabricate components using appropriate machining techniques for brass. 3. Perform final inspection and deburring of all manufactured parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-pressure pneumatic systems without verifying compatibility. | Always consult material datasheets to confirm brass alloy suitability for specific pressure and media requirements in pneumatic circuits. |
| Insufficient deburring of machined edges, leading to potential seal leaks or component damage. | Thoroughly deburr all edges and internal passages after machining to ensure smooth operation and prevent system failures. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic valve bodies, High-pressure pneumatic fittings, Manifold blocks for pneumatic control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||