This robust 0.841-inch thick nylon stock sheet offers superior strength and wear resistance. Its substantial dimensions of 38" x 27" make it ideal for large-scale, custom-engineered components requiring durability and precise machining.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.841" |
| Length | 38" |
| Width | 27" |
Specified by design engineers worldwide, this Nylon Stock Sheet exhibits exceptional mechanical properties for demanding industrial environments. With a precise thickness of 0.841 inches, and dimensions of 38 inches in length by 27 inches in width, it provides ample material for complex fabrication. Nylon's inherent toughness, excellent abrasion resistance, and good impact strength make it a preferred choice for wear pads, custom tooling, impact bumpers, and high-load structural components where reliability and longevity are paramount. Its machinability allows for intricate designs and tight tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and level. 2. Carefully position the nylon stock sheet according to design requirements. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even distribution of pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper substrate preparation leading to poor adhesion. | Thoroughly clean and degrease the mounting surface before applying adhesives or fasteners. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Use torque-limiting tools and ensure fasteners are appropriately sized and spaced to prevent over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Components, Wear Plates and Bushings, Impact Absorbers and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||