This 0.841-inch thick carbon steel stock sheet is specifically designed for robust construction in pneumatic system components. Its substantial gauge provides exceptional structural support and durability for critical applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.841" |
| Length | 45" |
| Width | 20" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a thickness of 0.841 inches, a length of 45 inches, and a width of 20 inches. The material's inherent tensile strength and hardness make it ideal for fabricating high-pressure enclosures, structural supports, and mounting hardware within pneumatic systems. Its robust nature resists deformation under significant mechanical stress, ensuring the integrity and longevity of your equipment in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the cutting area with proper safety equipment. 2. Accurately measure and mark the sheet according to design specifications. 3. Utilize appropriate cutting tools (e.g., plasma cutter, abrasive saw) for precise fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to component misalignment. | Double-check all measurements and use precision cutting equipment with appropriate guides. |
| Failure to deburr edges after cutting, creating safety hazards. | Thoroughly deburr all cut edges using a file or grinder to ensure a smooth, safe finish. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Housings, High-Pressure Air Reservoir Fabrication, Structural Supports for Pneumatic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||