Engineered for demanding industrial environments, this lubricating grade brass stock sheet offers exceptional wear resistance and self-lubricating properties for critical components. Its precise dimensions ensure seamless integration in high-performance machinery.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.832" |
| Length | 19" |
| Width | 26" |
Purpose-built for heavy-duty applications, this Brass Stock Sheet features a precise thickness of 0.832 inches, a length of 19 inches, and a width of 26 inches. Manufactured from a specialized brass alloy optimized for its lubricating characteristics, it exhibits a low coefficient of friction and inherent self-healing properties, minimizing wear and extending the lifespan of moving parts. This material is ideal for applications requiring continuous lubrication and resistance to galling under high loads and speeds, such as bearings, bushings, and sliding mechanisms within heavy industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions for the intended component. 3. Securely fasten the fabricated component using appropriate industrial fasteners, ensuring proper alignment within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass instead of a lubricating grade alloy. | Always specify and procure brass stock specifically designated as 'lubricating grade' or 'self-lubricating' for applications requiring low friction and wear resistance. |
| Insufficient surface preparation before installation. | Thoroughly clean both the brass component and mating surfaces to remove any contaminants that could impede proper lubrication or cause premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearings, Self-lubricating bushings, Wear plates for sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||