This high-quality brass stock sheet is specifically engineered for applications requiring inherent lubricity. Its optimal composition and precise dimensions ensure reliable performance in demanding environments where friction reduction is critical.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.830" |
| Length | 39" |
| Width | 46" |
Built to exacting engineering tolerances, this 0.830" thick brass stock sheet measures 39" in length and 46" in width. Composed of a specialized brass alloy, it exhibits excellent self-lubricating properties, low coefficient of friction, and good wear resistance. These characteristics make it ideal for sliding components, bearings, bushings, and other applications where reduced maintenance and extended service life are paramount. Its machinability allows for precise customization to meet specific design requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Precisely machine the brass stock sheet to the required dimensions for optimal fit. 3. Securely fasten the component in its intended application, verifying smooth operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Select this specialized lubricating brass stock for environments requiring inherent low friction and wear resistance. |
| Improperly tolerancing mating parts. | Adhere to strict dimensional tolerances during machining to ensure the self-lubricating properties are maximized. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates and slides, Low-friction bearing surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||