This 0.824-inch thick polycarbonate stock sheet offers superior impact resistance and excellent clarity, making it an ideal material for protective electrical enclosures and lighting covers in demanding environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.824" |
| Length | 47" |
| Width | 16" |
Manufactured under strict quality controls, this 0.824" thick polycarbonate sheet boasts exceptional impact strength, UV resistance, and a wide operating temperature range, ensuring long-term performance in electrical and lighting applications. Its precise dimensions of 47" in length and 16" in width provide ample material for custom fabrication of protective covers, machine guards, and lighting diffusers. Polycarbonate’s inherent flame retardancy and excellent electrical insulation properties further enhance its suitability for these critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for plastics. 2. Prepare the mounting surfaces and ensure they are clean and free of debris. 3. Secure the polycarbonate sheet using appropriate fasteners, ensuring not to over-tighten to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools which can cause cracking. | Utilize specialized plastic cutting tools such as a fine-tooth saw or a router with a specific plastic bit for clean, precise cuts. |
| Over-tightening fasteners, leading to stress and potential cracking of the polycarbonate. | Employ washers and avoid excessive torque when fastening. Consider pre-drilling holes with an appropriate size bit to accommodate thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Electrical Enclosure Covers, Lighting Diffusers and Covers, Machine Guards for Electrical Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||