This high-impact 0.815" polycarbonate stock sheet is engineered for demanding suspending and bracing applications. Its exceptional strength and durability ensure reliable performance under significant stress and load conditions.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.815" |
| Length | 18" |
| Width | 32" |
Purpose-built for heavy-duty applications, this 0.815" thick polycarbonate stock sheet offers unparalleled impact strength and rigidity, making it the material of choice for critical suspending and bracing systems. Measuring 18 inches by 32 inches, its superior tensile strength and high load-bearing capacity are derived from its inherent polycarbonate polymer structure, which resists fracture and deformation even under extreme environmental or mechanical stresses. This material is also inherently flame retardant and UV resistant, ensuring long-term performance in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for polycarbonate. 2. Prepare mounting surfaces and pre-drill holes in the sheet, ensuring clearance for fasteners. 3. Securely fasten the sheet to the support structure using load-rated hardware specifically designed for polycarbonate, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits not designed for plastics, leading to chipping or cracking. | Utilize specialized drill bits for polycarbonate or a sharp bit designed for plastics, ensuring proper speed and feed rates. |
| Over-tightening fasteners, inducing stress concentrations that can lead to premature failure. | Employ washers and tighten fasteners to a recommended torque specification for polycarbonate, allowing for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Heavy-duty industrial bracing components, Support structures for suspended equipment, Reinforcement for load-bearing assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||