Engineered brass stock sheet for demanding lubricating applications. This high-performance material offers excellent wear resistance and a low coefficient of friction, ensuring smooth operation and extended component life.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.811" |
| Length | 28" |
| Width | 32" |
Built to exacting engineering tolerances, this brass stock sheet is manufactured from a specialized alloy optimized for self-lubricating properties. With a precise thickness of 0.811 inches, and dimensions of 28 inches by 32 inches, it meets stringent requirements for applications demanding reduced friction and wear. Its inherent machinability allows for intricate part creation. Typical applications include bearings, bushings, and sliding components within moderate load and speed environments where traditional lubrication is impractical or undesirable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any contaminants. 2. Precisely machine the brass sheet to the required component dimensions. 3. Install the machined part, ensuring proper fit and alignment within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys in applications requiring specific lubricating properties. | Select a brass alloy specifically formulated for lubricating characteristics to ensure optimal performance and longevity. |
| Improper surface preparation leading to increased friction. | Ensure all mating surfaces are clean, smooth, and free of any debris or imperfections before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Low-friction bushings, Wear pads in sliding mechanisms, Gears for light-duty applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||