This high-performance polycarbonate sheet, in a 0.810" thickness, offers exceptional impact resistance and inherent lubricity. Ideal for demanding wear-resistant applications where reduced friction is critical.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.810" |
| Length | 35" |
| Width | 12" |
Manufactured under strict quality controls, this 0.810" thick, 35" x 12" polycarbonate stock sheet provides superior impact strength (up to 250 times that of glass) and excellent dimensional stability. Its inherent low coefficient of friction makes it suitable for applications requiring reduced wear and self-lubrication, such as bearings, wear strips, and conveyor components. This material exhibits good chemical resistance and a wide operating temperature range, ensuring reliability in harsh industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Carefully position the polycarbonate sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to cracking. | Maintain a minimum edge distance of at least 2 times the hole diameter when drilling. |
| Using abrasive cleaners that can scratch the surface. | Clean with mild soap and water, and a soft cloth. Avoid harsh chemicals or abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Self-lubricating bearings and bushings, Wear strips and guides for material handling, Conveyor components requiring low friction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||