This robust carbon steel stock sheet, measuring 0.808" thick, 42" in length, and 30" in width, is manufactured to exacting standards for critical measuring and inspection tasks. It offers exceptional rigidity and dimensional accuracy.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.808" |
| Length | 42" |
| Width | 30" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.808" thickness, providing unparalleled rigidity and resistance to deformation under load. Its precisely manufactured dimensions of 42" length and 30" width ensure consistent and accurate measurements in metrology and inspection environments. The inherent strength and durability of carbon steel make it an ideal substrate for precision tooling, calibration standards, and high-stress industrial applications where dimensional integrity is paramount. Surface finish is optimized for minimal light reflection and consistent feel, reducing operator error.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before use. 2. Position the sheet on a stable, level surface appropriate for the intended application. 3. Secure the sheet if necessary, depending on the specific operational requirements, to prevent shifting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sheet with surface imperfections for critical measurements. | Inspect the sheet thoroughly for any scratches, dents, or warping before proceeding with precision work. |
| Exposing the carbon steel to excessive moisture without proper protection. | Store and handle the sheet in a dry environment and apply a protective coating if long-term storage is required to prevent rust. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision measuring and inspection platforms, Calibration standards and reference surfaces, Jigs, fixtures, and tooling bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||