This premium brass stock sheet, specifically engineered for lubricating applications, offers exceptional durability and low friction. Its precise dimensions and material composition ensure superior performance in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.807" |
| Length | 34" |
| Width | 41" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.807" thickness, providing robust structural integrity. Manufactured from high-grade brass, it exhibits inherent self-lubricating properties and excellent wear resistance, making it ideal for components requiring reduced friction and extended service life. The generous dimensions of 34" in length and 41" in width allow for versatile fabrication into custom parts for industrial machinery, bearings, and sliding mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to ensure optimal adhesion and function. 2. Cut the brass stock sheet to the required dimensions using appropriate metal cutting tools. 3. Secure the fabricated brass component in its designated location, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Select lubricating grade brass stock for environments where friction reduction is critical. |
| Improperly cleaning the sheet before fabrication. | Always degrease and remove any surface contaminants from the brass sheet prior to cutting or shaping to prevent processing issues. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear plates in sliding mechanisms, Bushings and sleeves for rotating shafts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||