Engineered for superior performance, this 0.806-inch thick polycarbonate stock sheet boasts inherent lubricating properties. Ideal for applications requiring low friction and wear resistance, ensuring operational efficiency and longevity.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.806" |
| Length | 17" |
| Width | 41" |
Trusted by engineers across multiple sectors, this high-performance 0.806" thick, 17" x 41" polycarbonate stock sheet is specifically formulated for lubricating applications. Its exceptional impact resistance, dimensional stability, and inherent low coefficient of friction make it suitable for demanding environments. The material's ability to withstand chemical exposure and maintain its properties under varied temperature conditions further solidifies its utility in components requiring reduced wear and operational smoothness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking. | Use appropriate torque settings for fasteners and consider using washers to distribute pressure. |
| Using incompatible cleaning agents that can degrade polycarbonate. | Utilize mild soap and water or specialized polycarbonate cleaners for maintenance. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction bearing surfaces, Wear pads and guides, Slide mechanisms in automated equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||