This 0.804-inch thick Nylon stock sheet, measuring 16 inches by 46 inches, offers exceptional mechanical strength and wear resistance, making it ideal for robust industrial components and fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.804" |
| Length | 16" |
| Width | 46" |
Specified by design engineers worldwide, this industrial-grade Nylon stock sheet is manufactured to exacting tolerances. With a precise thickness of 0.804 inches, a length of 16 inches, and a width of 46 inches, it provides a substantial raw material for custom machining. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical resistance, ensure its suitability for a wide array of demanding applications where durability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the Nylon stock sheet according to the design. 2. Utilize appropriate cutting tools designed for plastics, such as a band saw or CNC router, to achieve precise dimensions. 3. Smooth any rough edges with a deburring tool or fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard wood or metal cutting tools without proper setup, leading to melting or chipping of the Nylon. | Employ sharp, carbide-tipped blades specifically designed for plastic machining and ensure adequate cooling to prevent overheating. |
| Over-tightening fasteners when assembling components made from this Nylon sheet, potentially causing stress cracks. | Use appropriate torque settings and consider washers to distribute pressure evenly, avoiding excessive clamping force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gears and bearings, Wear strips and guide rails, Machine guards and covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||