This high-grade carbon steel stock sheet provides exceptional structural integrity and wear resistance, making it a cornerstone for demanding pneumatic system fabrication and repair.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.802" |
| Length | 21" |
| Width | 46" |
A proven choice for industrial professionals, this 0.802-inch thick carbon steel stock sheet offers superior strength and durability for critical pneumatic components. Measuring 21 inches in length and 46 inches in width, its robust material composition ensures resistance to impact, abrasion, and moderate corrosive environments typical in pneumatic machinery. Ideal for fabricating robust housings, mounting brackets, and structural elements within compressed air systems, this sheet steel is engineered for longevity and high-performance operation under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the stock sheet thoroughly to remove any oil, grease, or debris. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools (e.g., plasma cutter, abrasive saw). 3. Prepare edges for welding or fastening according to component design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-pressure pneumatic applications without proper stress analysis. | Consult engineering drawings and perform necessary stress calculations to ensure material suitability for the intended operating pressures and loads. |
| Inadequate edge preparation leading to weak welds or compromised structural integrity. | Ensure all edges are beveled and cleaned according to welding procedures to achieve full penetration and a strong, reliable joint. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic actuator housings, Compressed air receiver tank fabrication, Industrial manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||