This robust 0.801" thick carbon steel stock sheet, measuring 31" x 37", provides a stable and dimensionally accurate foundation for precision measurement, inspection, and fabrication tasks in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.801" |
| Length | 31" |
| Width | 37" |
Specified by design engineers worldwide, this carbon steel stock sheet offers exceptional rigidity and a precisely machined surface. With a nominal thickness of 0.801 inches, and dimensions of 31 inches in length and 37 inches in width, it is manufactured from high-grade carbon steel, ensuring superior durability, wear resistance, and consistent thermal expansion properties crucial for metrology and precision tooling. Its dense microstructure minimizes internal stresses, guaranteeing long-term dimensional stability for critical assembly and inspection fixtures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is level and free from debris. 2. Carefully position the carbon steel stock sheet onto the prepared surface, aligning mounting holes as required. 3. Securely fasten the sheet using appropriate hardware, ensuring even pressure distribution to avoid distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to surface scratches or nicks. | Utilize soft, non-marring materials during transport and installation. Avoid dropping or dragging the sheet. |
| Mounting the sheet on an uneven surface, causing calibration inaccuracies. | Verify the flatness and levelness of the mounting surface with a precision level and straight edge before installation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision inspection fixtures, Machining setup plates, Gauging standards and calibration surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||