This seamless carbon steel pipe, Schedule 40, offers superior strength and durability. Engineered with a 0.173" wall thickness and 5.803" OD, it's ideal for high-pressure fluid transport and structural support.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 0.8" |
| Outside Diameter | 5.803" |
| Wall Thickness | 0.173" |
Precision-manufactured to tight tolerances, this 0.8" nominal size seamless carbon steel pipe adheres to the Schedule 40 standard, ensuring consistent wall thickness of 0.173" and an outside diameter of 5.803". Constructed from high-grade carbon steel, it provides excellent tensile strength and resistance to abrasion, making it suitable for demanding fluid conveyance systems, structural components, and general industrial fabrication where reliability under pressure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of burrs, and properly beveled for welding or threading. 2. Align pipe sections carefully, maintaining proper spacing for couplings or joints. 3. Secure pipe using appropriate supports and restraints to prevent movement during operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper beveling leading to incomplete weld penetration. | Utilize a pipe beveling machine or hand grinder to create a consistent and correct bevel angle as per welding specifications. |
| Over-tightening threaded connections, causing damage to the threads or pipe wall. | Use appropriate thread sealant and tighten connections firmly but without excessive force, following manufacturer recommendations for torque. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transport, Structural support in industrial machinery, General purpose piping systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||