This premium carbon steel stock sheet is engineered for demanding lubricating applications. Its substantial 0.796" thickness and precise dimensions ensure robust performance and long-term reliability in industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.796" |
| Length | 15" |
| Width | 46" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet features a thickness of 0.796 inches, a length of 15 inches, and a width of 46 inches. The material composition is optimized for lubricity, offering excellent wear resistance and a low coefficient of friction under load. Its inherent strength and machinability make it suitable for fabricating components that require smooth, consistent motion and reduced thermal buildup in high-friction environments, ensuring operational efficiency and extended equipment lifespan.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean, dry, and free from debris. 2. Carefully position the stock sheet according to the design specifications, verifying alignment. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) as dictated by the application's load and vibration requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a non-lubricating grade steel for high-friction applications. | Always select a steel grade specifically designed for lubricity and wear resistance to prevent premature failure and ensure smooth operation. |
| Inadequate surface preparation before securing the sheet. | Thoroughly clean and degrease the contact surfaces to ensure optimal adhesion and prevent the ingress of contaminants that could compromise lubrication. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear strips in sliding mechanisms, Guide rails for automated equipment, Low-friction conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||