This premium brass stock sheet is engineered for superior lubrication in demanding industrial settings. Its precise dimensions and inherent material properties ensure exceptional performance and longevity under heavy loads.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.796" |
| Length | 15" |
| Width | 31" |
Purpose-built for heavy-duty applications, this brass stock sheet offers a critical thickness of 0.796 inches, a length of 15 inches, and a width of 31 inches. Its brass composition provides excellent inherent lubricity, low friction coefficient, and superior wear resistance, making it ideal for self-lubricating bearings, bushings, and wear plates in high-pressure or high-speed machinery. The material's machinability allows for precise custom part fabrication, ensuring a perfect fit and optimal function in critical wear components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces of both the brass stock sheet and the receiving component to remove any debris or contaminants. 2. Carefully align the brass stock sheet according to design specifications, ensuring proper orientation for intended function. 3. Secure the brass stock sheet using appropriate fasteners or adhesive methods as dictated by the application's engineering requirements and load-bearing capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Always ensure all mating surfaces are meticulously cleaned and free of any foreign particles before installation. |
| Over-tightening fasteners, which can distort the brass and compromise its lubricating properties. | Use torque specifications provided by the equipment manufacturer or consult an engineer to avoid overtightening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates in heavy machinery, Bushings for high-load pivots.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||