This premium 316 stainless steel stock sheet is engineered for critical lubricating applications. Its superior corrosion resistance and formability make it an ideal choice for environments requiring exceptional durability and chemical inertness.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.795" |
| Length | 46" |
| Width | 17" |
Manufactured under strict quality controls, this 316 stainless steel sheet offers a nominal thickness of 0.795 inches (20.2 mm), a length of 46 inches (1168.4 mm), and a width of 17 inches (431.8 mm). Grade 316 is renowned for its enhanced molybdenum content, providing superior resistance to pitting and crevice corrosion, particularly in chloride-rich environments. This makes it exceptionally well-suited for marine, chemical processing, and food/beverage industries where lubrication systems are exposed to aggressive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before installation. 2. Cut the sheet to the required dimensions using appropriate tools for stainless steel. 3. Deburr all edges to prevent potential material fatigue or injury during handling and operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel grades in corrosive environments. | Always specify 316 stainless steel for applications involving chlorides, acids, or other aggressive chemicals to ensure longevity and prevent premature failure. |
| Improper edge finishing after cutting. | Thoroughly deburr all cut edges to eliminate stress concentrations that can lead to cracking or reduced performance in dynamic lubricating systems. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Components for specialized lubrication systems, Wear plates and guides in corrosive environments, Parts for food and pharmaceutical processing equipment requiring lubrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||