This high-performance Nylon stock sheet is engineered for demanding pneumatic systems. Its substantial 0.790" thickness offers exceptional strength and longevity in critical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.790" |
| Length | 44" |
| Width | 43" |
Precision-manufactured to tight tolerances, this 0.790" thick Nylon stock sheet measures 44" in length and 43" in width. Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and good impact strength make it an ideal material for pneumatic components. This sheet is specifically suited for fabricating wear pads, bushings, seals, and other dynamic parts within pneumatic cylinders, valves, and air preparation units where resistance to friction and operational stress is paramount. Its machinability allows for intricate custom part creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the desired component shape from the Nylon stock sheet using appropriate cutting and machining tools. 2. Ensure all mating surfaces are clean and free of debris. 3. Securely install the fabricated Nylon component into the pneumatic assembly, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, which can lead to stress cracking in Nylon. | Use torque wrenches and follow manufacturer's recommended torque specifications for fasteners in contact with Nylon. |
| Using incompatible lubricants or solvents that can degrade Nylon. | Consult material compatibility charts to ensure lubricants and cleaning agents are safe for use with Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder wear bands, Valve seat components, Air preparation unit seals, Custom pneumatic part fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||