This high-performance lubricating nylon stock sheet offers superior wear resistance and low friction. Precisely manufactured to 0.790" thickness, 38" length, and 36" width, it's ideal for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.790" |
| Length | 38" |
| Width | 36" |
Engineered for reliability and performance, this lubricating grade nylon stock sheet measures 0.790 inches in thickness, 38 inches in length, and 36 inches in width. Its inherent self-lubricating properties, derived from controlled additive incorporation, significantly reduce friction and wear compared to standard nylons. This material exhibits excellent tensile strength and dimensional stability, making it suitable for applications requiring consistent performance under load and in demanding environmental conditions. Typical applications include wear pads, slide guides, and low-friction bearing surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of contaminants. 2. Cut the nylon stock to the desired dimensions using appropriate cutting tools. 3. Securely fasten the nylon component using mechanical fasteners or adhesive methods as dictated by the application's design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting that causes stress concentrations. | Use sharp tooling and appropriate cutting speeds to minimize internal stresses during fabrication. |
| Over-tightening fasteners, leading to deformation. | Utilize washers and torque fasteners to recommended levels to prevent excessive stress on the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Pads, Low-Friction Bushings and Bearings, Slide Guides and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||