This robust carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and precise dimensions ensure superior structural integrity and performance in critical systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.790" |
| Length | 19" |
| Width | 21" |
A high-performance industrial component, this 0.790-inch thick carbon steel stock sheet offers exceptional strength and durability. Measuring 19 inches in length and 21 inches in width, it provides a substantial material base for fabrication. The carbon steel composition ensures excellent resistance to pressure and mechanical stress, making it ideal for housings, structural supports, and custom enclosures within pneumatic systems. Its inherent rigidity contributes to the overall stability and longevity of the manufactured components, meeting stringent industrial standards for reliability and performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., plasma cutter, abrasive saw) for precise material removal, following safety guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-pressure environments without proper design considerations. | Always select carbon steel grades with appropriate tensile strength and hardness for the intended pneumatic pressure and operational stresses. |
| Inadequate edge preparation after cutting, leading to stress concentrations. | Deburr and smooth all cut edges to prevent potential fracture points and ensure even material distribution. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder end caps and housings, Mounting brackets for pneumatic actuators, Custom enclosures for pneumatic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||