This heavy-gauge carbon steel stock sheet provides exceptional structural integrity for demanding material handling applications. Its substantial thickness ensures superior load-bearing capacity and long-term durability under extreme conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 43" |
| Width | 24" |
Built to exacting engineering tolerances, this 0.787" thick carbon steel sheet offers a robust 43" length and 24" width. Composed of high-strength carbon steel (e.g., ASTM A36 or equivalent), it exhibits excellent tensile strength and yield point, crucial for supporting heavy loads and resisting deformation. The material's inherent toughness makes it ideal for fabrication into custom material handling equipment, structural components, and wear plates where resistance to impact and abrasion is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the carbon steel sheet according to design specifications. 3. Secure the sheet using appropriate fasteners (e.g., high-strength bolts, welding) suitable for the anticipated load and environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the load capacity of the steel sheet. | Always specify and use fasteners (bolts, nuts, washers) or welding procedures that meet or exceed the tensile and shear strength requirements dictated by the application's load. |
| Improper surface preparation leading to premature corrosion or weak bonding. | Thoroughly clean and degrease the mounting surface and the steel sheet. For welding, ensure proper joint preparation and beveling to achieve full penetration and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication of heavy-duty shelving and racks, Reinforcement plates for industrial machinery and equipment, Wear pads and impact surfaces in loading docks and transfer points.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||