This premium carbon steel stock sheet, specifically designed for lubricating applications, offers robust durability and precise dimensional stability. Ideal for demanding industrial environments requiring reliable material performance.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.786" |
| Length | 39" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.786-inch thick carbon steel stock sheet measures 39 inches in length and 32 inches in width. Its composition ensures excellent machinability and wear resistance, making it suitable for components requiring consistent lubrication and reduced friction. The material's inherent strength and thermal conductivity facilitate efficient heat dissipation in dynamic systems. Ideal for fabricating bushings, bearings, and specialized slide plates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project requirements. 2. Prepare surface for cutting or fabrication according to design specifications. 3. Install fabricated components ensuring proper alignment and lubrication points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs and dimensional inaccuracies. | Employ high-speed steel or carbide cutting tools specifically designed for carbon steel to ensure clean cuts and maintain precise dimensions. |
| Inadequate surface preparation before installation, hindering lubrication effectiveness. | Thoroughly clean and degrease the fabricated part and mating surfaces to remove any contaminants that could impede lubricant flow and cause premature wear. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing surfaces, Bushings and sleeves, Guide rails and slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||