This robust 0.780-inch thick Nylon stock sheet offers exceptional mechanical strength and durability. Its precise dimensions of 47" x 13" make it a versatile raw material for custom fabrication and demanding industrial components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.780" |
| Length | 47" |
| Width | 13" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial thickness of 0.780 inches, a length of 47 inches, and a width of 13 inches. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, superior abrasion resistance, and good chemical inertness, making it suitable for applications involving moderate loads, friction, and exposure to various solvents and oils. The material's inherent toughness and self-lubricating properties contribute to extended component life in dynamic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting tool is sharp and appropriate for nylon. 2. Accurately measure and mark the desired cut lines on the sheet. 3. Execute precise cuts, maintaining consistent speed and pressure for a clean edge.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to chipping or melting. | Utilize high-speed steel or carbide-tipped cutting tools specifically designed for plastics. |
| Applying excessive heat during machining, causing material deformation. | Employ adequate cooling methods, such as air jets or coolant, and maintain appropriate feed rates. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||