This premium brass stock sheet offers exceptional stability and machinability for critical measuring and inspecting tasks. Its substantial thickness ensures rigidity and accuracy in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.779" |
| Length | 27" |
| Width | 35" |
Built to exacting engineering tolerances, this brass stock sheet provides superior dimensional stability and consistent performance. Measuring 0.779 inches in thickness, 27 inches in length, and 35 inches in width, it is fabricated from high-grade brass, known for its excellent corrosion resistance, low magnetic permeability, and good thermal conductivity. These properties make it an ideal substrate for precision tooling, inspection fixtures, templates, and specialized measurement devices where accuracy and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended workspace is clean, level, and free from debris. 2. Carefully position the brass stock sheet in the desired location, ensuring proper alignment. 3. Secure the sheet according to the application's requirements using appropriate fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can cause galvanic corrosion with brass. | Utilize brass or stainless steel fasteners to maintain material integrity and prevent corrosion. |
| Subjecting the sheet to excessive bending or impact, compromising its flatness and accuracy. | Handle with care to avoid deformation; support the sheet adequately during use and transport. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision inspection fixtures, Custom measurement gauges, Template manufacturing, Prototyping of metrology equipment, Electrical grounding plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||