This heavy-gauge carbon steel stock sheet is engineered for critical pneumatic system components requiring exceptional structural integrity. Its robust dimensions and material properties ensure long-term performance under extreme operational stress.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.777" |
| Length | 26" |
| Width | 29" |
Purpose-built for heavy-duty applications, this 0.777" thick carbon steel stock sheet boasts a 26" length and 29" width, providing substantial material for fabricating robust pneumatic system enclosures, pressure vessels, and structural supports. The inherent strength and rigidity of carbon steel make it ideal for environments demanding high tensile strength and resistance to deformation under pressure. Its precise dimensions ensure consistent fit and finish in complex assemblies, contributing to the overall reliability and safety of pneumatic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely mark and cut to required dimensions using appropriate tooling. 3. Securely fasten to adjacent components using certified welding or bolting techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for connections. | Always utilize fasteners rated for the anticipated load and environmental conditions, ensuring proper torque specifications are met. |
| Inadequate surface preparation before welding or coating. | Thoroughly degrease and remove any mill scale or rust to ensure optimal weld penetration and coating adhesion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Enclosures, Pressure Vessel Fabrication, Heavy-Duty Support Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||