This brass stock sheet is engineered for demanding lubricating applications. Its specific alloy composition and precise dimensions ensure optimal performance and longevity in high-friction environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.776" |
| Length | 28" |
| Width | 15" |
A high-performance industrial component, this brass stock sheet is manufactured to precise specifications. With a thickness of 0.776 inches, a length of 28 inches, and a width of 15 inches, it provides substantial material for fabrication. The inherent properties of brass, including its excellent self-lubricating characteristics and superior wear resistance, make it ideal for components requiring reduced friction and extended service life. This sheet is particularly suited for applications in heavy machinery, bearing surfaces, and sliding mechanisms where consistent lubrication and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of contaminants. 2. Fabricate the brass stock sheet to the required component dimensions using appropriate cutting and shaping tools. 3. Install the fabricated component into its intended operating environment, ensuring proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a brass alloy not specifically suited for lubrication. | Verify the alloy composition meets the requirements for self-lubricating properties and wear resistance for the intended application. |
| Improper surface preparation of the fabricated part. | Thoroughly clean and deburr all edges and surfaces of the fabricated brass component to prevent premature wear or operational issues. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates for sliding mechanisms, Bushings and sleeves in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||