This robust carbon steel stock sheet, precisely manufactured to 0.767" thickness, is engineered for demanding abrading and polishing operations. Its substantial dimensions ensure ample material for a wide range of industrial uses.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.767" |
| Length | 14" |
| Width | 47" |
Specified by design engineers worldwide, this carbon steel stock sheet offers exceptional durability and wear resistance, crucial for abrading and polishing applications. Measuring 0.767 inches thick, 14 inches in length, and 47 inches in width, its high carbon content contributes to superior hardness and edge retention. This material is ideal for producing custom abrasive tools, grinding surfaces, and wear plates where consistent performance under high stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the intended substrate or machinery.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to uneven edges and material deformation. | Ensure cutting tools are sharp and maintained for clean, precise cuts. |
| Improper surface preparation before fastening, resulting in a weak bond. | Thoroughly degrease and prepare the mounting surface for optimal adhesion or mechanical fastening. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom abrasive wheel fabrication, Surface finishing equipment components, Wear-resistant tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||