Engineered for robust structural support, this 0.762" thick brass stock sheet offers exceptional corrosion resistance and load-bearing capacity. Ideal for critical suspending and bracing applications where reliability is paramount.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.762" |
| Length | 26" |
| Width | 16" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise 0.762" thickness, 26" length, and 16" width. Composed of a high-grade brass alloy, it exhibits superior tensile strength and excellent resistance to environmental degradation. Its malleability allows for custom shaping without compromising structural integrity, making it suitable for demanding industrial environments. This material is chosen for its proven performance in static and dynamic load-bearing scenarios, ensuring long-term operational effectiveness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the required dimensions and cut the brass stock sheet accurately using appropriate metalworking tools. 2. Prepare mounting surfaces and ensure they are clean, level, and capable of supporting the intended load. 3. Securely fasten the brass sheet using corrosion-resistant hardware, ensuring even distribution of stress across the installation points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that cannot adequately bear the load. | Always specify and use fasteners with a shear and tensile strength rating that exceeds the calculated load requirements for the brass sheet. |
| Inadequate surface preparation leading to poor adhesion or uneven load distribution. | Thoroughly clean and degrease mounting surfaces to ensure a secure and stable installation, free from contaminants. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom bracing for heavy machinery, Structural support in corrosive environments, Custom hangers and suspension systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||