Engineered for robust safety, this 0.759-inch thick polycarbonate sheet provides exceptional impact resistance and clarity, ideal for protective barriers and machine guarding in demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.759" |
| Length | 16" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.759-inch thick polycarbonate stock sheet measures 16 inches in length and 17 inches in width. Manufactured from high-performance polycarbonate resin, it exhibits superior impact strength, exceeding that of glass and acrylic by a significant margin, while maintaining excellent optical clarity. Its inherent UV resistance ensures long-term performance in outdoor applications, and its flame retardant properties contribute to enhanced safety in critical areas. This material is readily machinable and thermoformable, allowing for custom fabrication of complex safety solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Position the polycarbonate sheet accurately, aligning pre-drilled holes if applicable. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks and reduced impact resistance. | Utilize washers and do not overtighten fasteners. Allow for thermal expansion by using slotted holes where appropriate. |
| Using abrasive cleaning agents or tools that can scratch the polycarbonate surface. | Clean with mild soap and water, using a soft cloth or sponge. Avoid ammonia-based cleaners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding, Safety shields, Protective barriers, Vandalism resistance, Glazing for hazardous areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||