This 0.753-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Precisely cut to 17" x 26", it's engineered for robust fabricating applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.753" |
| Length | 17" |
| Width | 26" |
Manufactured under strict quality controls, this 0.753" thick polycarbonate sheet exhibits outstanding impact strength, a high degree of optical clarity, and excellent thermal stability. Its inherent toughness makes it resistant to shattering and cracking, even under extreme stress. The sheet measures 17" in length and 26" in width, providing ample material for a variety of fabrication processes including cutting, drilling, and thermoforming. Ideal for protective glazing, machine guards, and structural components where durability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and well-lit. 2. Carefully handle the polycarbonate sheet to avoid scratches or damage. 3. Utilize appropriate cutting and shaping tools designed for polycarbonate, maintaining proper cooling to prevent thermal deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for plastics can lead to chipping and poor edge quality. | Employ sharp, carbide-tipped blades specifically designed for cutting polycarbonate. Maintain a consistent feed rate and use coolant if necessary. |
| Excessive heat during fabrication can cause the material to warp or degrade. | Control heat buildup by using appropriate tooling, intermittent cutting, and adequate cooling. Refer to material datasheets for recommended temperature ranges. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Glazing, Industrial Enclosures, Custom Fabrication Projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||