This premium brass stock sheet, engineered for lubricating applications, offers exceptional wear resistance and a naturally low coefficient of friction. Its precise dimensions ensure seamless integration into complex machinery and critical components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.753" |
| Length | 14" |
| Width | 40" |
Trusted by engineers across multiple sectors, this lubricating grade brass stock sheet exhibits superior antifriction properties, making it ideal for components subjected to high stress and sliding motion. Its composition provides excellent machinability and corrosion resistance, ensuring longevity in demanding operational environments. With a thickness of 0.753 inches, a width of 40 inches, and a length of 14 inches, this material is perfectly suited for manufacturing bearings, bushings, wear plates, and other friction-critical parts where reliability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Ensure the brass sheet is accurately dimensioned and fitted to the intended component. 3. Securely fasten the brass sheet using appropriate fasteners, avoiding over-tightening that could distort the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Specify lubricating grade brass alloys with proven antifriction characteristics for components subjected to significant wear and sliding contact. |
| Improper surface preparation leading to premature wear. | Always ensure mating surfaces are clean, smooth, and free of abrasive particles before installation of brass components. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearings and Bushings, Wear Plates and Guides, Slide Mechanisms, Lubricated Machine Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||