This high-quality Nylon stock sheet, measuring 0.752" thick, 28" wide, and 42" long, offers exceptional durability and wear resistance. Its robust material properties make it suitable for a wide range of industrial cutting and fabrication needs.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.752" |
| Length | 28" |
| Width | 42" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.752 inches, a width of 28 inches, and a length of 42 inches. Engineered from premium Nylon, it exhibits excellent tensile strength, high abrasion resistance, and good impact toughness. This material is well-suited for machining into components requiring a balance of mechanical properties, offering self-lubricating characteristics and chemical resistance in various industrial environments. Its dimensional stability ensures precise fabrication for critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Safely secure the Nylon stock sheet to your cutting surface using appropriate clamps. 2. Utilize a suitable saw blade (e.g., a fine-tooth carbide blade) optimized for plastic cutting to prevent melting or chipping. 3. Proceed with the cut at a controlled feed rate, ensuring adequate cooling if necessary to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a saw blade not designed for plastic, leading to melting or rough edges. | Employ a sharp, fine-tooth carbide blade specifically designed for cutting plastics, ensuring a clean and precise cut. |
| Applying excessive force or speed during cutting, causing material stress or blade binding. | Maintain a controlled feed rate and moderate speed, allowing the blade to do the work and preventing overheating or damage to the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Machined structural components, Prototyping and fabrication of specialized parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||