This robust 0.751-inch thick Nylon stock sheet, measuring 37" x 22", is engineered for demanding abrading and polishing applications. Its exceptional durability and consistent material properties ensure reliable performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.751" |
| Length | 37" |
| Width | 22" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits a nominal thickness of 0.751 inches, a length of 37 inches, and a width of 22 inches. Composed of high-performance Nylon, it offers excellent abrasion resistance, low coefficient of friction, and good impact strength. These properties make it ideal for use as backing material in abrasive belts, polishing pads, and as a wear surface in various industrial machinery. The material's inherent toughness allows it to withstand significant mechanical stress and repeated use in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the desired dimensions using appropriate industrial cutting tools. 2. Securely fasten the cut sheet to the intended substrate or machinery using industrial-grade adhesives or mechanical fasteners. 3. Ensure the installed sheet is flush and free of any protruding edges to prevent damage or operational issues.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for Nylon, leading to chipping or rough edges. | Employ sharp, high-speed cutting tools specifically designed for polymers, such as carbide-tipped saws or routers. |
| Insufficient or improper adhesion/fastening, resulting in premature detachment. | Utilize industrial-strength adhesives rated for Nylon or appropriate mechanical fasteners with washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Abrasive belt backing, Polishing pad substrate, Wear strips and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||