This high-grade carbon steel stock sheet, specifically formulated for lubricating applications, offers exceptional durability and wear resistance. Its precise dimensions and material properties ensure optimal performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.750" |
| Length | 17" |
| Width | 41" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet boasts a substantial 0.750" thickness, a generous 17" length, and a 41" width, totaling 41"x17"x0.750". Engineered from high-quality carbon steel, it exhibits excellent tensile strength and machinability, making it ideal for components requiring consistent lubrication and high load-bearing capacity. Its uniform composition minimizes internal stresses, contributing to predictable performance and extended service life in applications such as bearing races, wear plates, and custom lubricant-retaining components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to which the sheet is being attached is clean, dry, and free of contaminants. 2. Carefully position the carbon steel stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, such as welding or bolting, as dictated by the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly degrease and clean all mating surfaces before installation to ensure optimal contact and performance. |
| Over-tightening fasteners, causing distortion or localized stress points. | Use torque wrenches to ensure fasteners are tightened to manufacturer-recommended specifications, preventing material deformation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom bearing components, Wear-resistant plates, Lubricant-retaining assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||