This substantial brass stock sheet offers exceptional strength and corrosion resistance, making it a superior choice for robust material handling solutions. Its precise dimensions ensure seamless integration into demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.749" |
| Length | 16" |
| Width | 40" |
A high-performance industrial component, this 0.749-inch thick brass stock sheet measures 16 inches in width and 40 inches in length, providing a substantial and durable material for fabrication. Crafted from high-grade brass alloy, it exhibits excellent machinability, superior corrosion resistance against a wide range of chemicals and atmospheric conditions, and good electrical conductivity. These properties make it exceptionally suitable for custom-fabricated material handling equipment, structural components in corrosive environments, and applications where non-sparking properties are critical. Its significant thickness ensures high load-bearing capacity and longevity in rigorous operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and inspect for any defects. 2. Prepare the fabrication area and ensure necessary safety equipment is in place. 3. Fabricate the sheet according to design specifications using appropriate cutting, bending, and fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for highly corrosive environments. | Ensure the specific brass alloy is rated for the intended corrosive agents and concentrations. |
| Improper handling leading to scratches or dents on the surface. | Use appropriate lifting equipment and protective measures during transport and installation to maintain surface integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Customized material handling carts and trolleys, Corrosion-resistant structural supports, Non-sparking components in hazardous areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||