This robust Nylon stock sheet, measuring 0.748 inches thick, 47 inches long, and 20 inches wide, is engineered for superior performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.748" |
| Length | 47" |
| Width | 20" |
A high-performance industrial component, this Nylon stock sheet offers exceptional mechanical strength, superior wear resistance, and good chemical stability. With precise dimensions of 0.748 inches (19mm) thickness, 47 inches (1194mm) length, and 20 inches (508mm) width, it is ideal for fabricating durable parts such as bearings, gears, bushings, and wear pads. Its inherent lubricity and impact resistance make it suitable for high-load applications where reduced friction and extended service life are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet using a sharp marking tool. 2. Utilize a high-speed saw with a fine-tooth blade, ensuring adequate cooling to prevent melting. 3. Carefully deburr all cut edges to achieve a smooth finish and remove any residual material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or inappropriate saw blade. | Employ a sharp, fine-tooth saw blade specifically designed for cutting plastics or Nylon. Ensure proper blade speed and feed rate. |
| Insufficient cooling during cutting. | Apply a coolant or lubricant during the sawing process to prevent the Nylon from overheating and melting, which can lead to poor cut quality and blade damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machined Components, Wear Strips, Gears and Sprockets, Bushings and Bearings, Protective Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||