This robust carbon steel stock sheet, measuring 0.747" thick by 20" wide and 41" long, is engineered for demanding suspending and bracing applications. Its substantial thickness and high-strength carbon steel ensure exceptional load-bearing capabilities and long-term structural integrity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.747" |
| Length | 20" |
| Width | 41" |
A high-performance industrial component, this carbon steel stock sheet is precisely manufactured to a thickness of 0.747 inches, a length of 20 inches, and a width of 41 inches. Composed of high-grade carbon steel, it exhibits superior tensile strength and yield strength, making it ideal for critical structural support and bracing systems. Its inherent rigidity and durability ensure reliable performance under significant static and dynamic loads, offering a cost-effective and resilient solution for heavy-duty industrial installations where structural integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the carbon steel stock sheet at the desired location for suspension or bracing. 2. Securely fasten the sheet using appropriate industrial-grade fasteners (e.g., heavy-duty bolts, rivets) through pre-drilled or field-drilled holes, ensuring compliance with structural load calculations. 3. Verify the stability and load-bearing capacity of the installed component before applying operational loads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners that cannot support the intended load. | Always consult engineering specifications and load charts to select fasteners with adequate shear and tensile strength, compatible with the carbon steel sheet and the application's requirements. |
| Inadequate pre-drilling or improper hole preparation, leading to stress concentrations. | Ensure holes are drilled cleanly with appropriate bit sizes to avoid material deformation or burrs that could compromise structural integrity. Deburr all edges after drilling. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty structural bracing in construction and manufacturing facilities, Support platforms and overhead suspension systems for industrial equipment, Reinforcement and load distribution components in heavy machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||