Engineered for precision, this 0.745-inch thick brass stock sheet offers exceptional machinability and corrosion resistance. Its robust dimensions ensure suitability for a wide array of industrial and artistic applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.745" |
| Length | 23" |
| Width | 23" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting tolerances for critical applications. Comprising a high-purity brass alloy, it exhibits excellent formability, solderability, and electrical conductivity, while maintaining superior tensile strength at 0.745 inches thick. The generous 23-inch by 23-inch dimensions facilitate efficient material utilization in fabrication, CNC machining, and custom part creation, making it a preferred choice for demanding industrial processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material suitability for the intended application and ensure all safety precautions are observed. 2. Precisely mark cutting lines using appropriate measuring tools and a scribe. 3. Execute cuts using a suitable saw blade designed for non-ferrous metals, maintaining a steady feed rate to prevent over-heating or binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a saw blade not designed for brass, leading to poor cut quality and premature blade wear. | Employ a blade with a high tooth count and a sharp, negative hook angle, specifically manufactured for cutting brass and other non-ferrous metals. |
| Applying excessive force during sawing, causing binding and potential material damage or workpiece instability. | Maintain a consistent, moderate feed rate and allow the saw blade to do the work. Use appropriate clamping to secure the material firmly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Machined Components, Electrical Connectors and Terminals, Decorative Architectural Elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||