Engineered brass stock sheet, ideal for low-friction applications. Its superior machinability and inherent self-lubricating properties make it a prime choice for wear-resistant components in demanding industrial machinery.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.743" |
| Length | 28" |
| Width | 30" |
Designed for demanding industrial environments, this brass stock sheet offers exceptional performance in lubricating applications. With a precise thickness of 0.743 inches and generous dimensions of 28 inches by 30 inches, it provides ample material for custom fabrication. The brass alloy composition ensures excellent machinability and inherent self-lubricating characteristics, significantly reducing wear and extending the service life of components subjected to friction. This material is engineered to withstand moderate loads and operating temperatures typical in conveyor systems, bearing surfaces, and sliding mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the designated surface is clean, dry, and free from debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the mating surface using industry-standard fasteners and alignment methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or material deformation. | Employ sharp, high-quality cutting tools specifically designed for working with brass to achieve clean cuts and maintain material integrity. |
| Insufficient surface preparation before installation, resulting in poor contact and premature wear. | Thoroughly clean and degrease both the brass component and the mating surface to ensure optimal contact and friction reduction. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Guide rails, Bushings and sleeves, Conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||