This high-quality carbon steel stock sheet is specifically designed for lubricating applications. Its robust construction and precise dimensions ensure reliable performance in demanding industrial settings.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.740" |
| Length | 33" |
| Width | 40" |
Precision-manufactured to tight tolerances, this 0.740-inch thick carbon steel sheet offers superior dimensional stability for critical lubricating systems. Composed of industrial-grade carbon steel, it provides excellent wear resistance and a smooth surface finish essential for minimizing friction and ensuring efficient lubrication. The 33-inch by 40-inch dimensions allow for versatile fabrication into custom components such as wear plates, guide rails, and bearing surfaces where consistent lubrication performance is paramount. Its inherent strength and durability make it ideal for high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Position the carbon steel stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques as required by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before installation. | Ensure all mating surfaces are meticulously cleaned and free of any oils, grease, or particulate matter to guarantee proper contact and adhesion. |
| Using incorrect fasteners or welding procedures. | Consult the application's engineering drawings or relevant standards to determine the appropriate fastening or welding method, ensuring structural integrity and longevity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear plates in lubricating mechanisms, Guide rails for sliding components, Custom bearing surfaces in low-friction systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||